Ocean Blue Reflective (5640R)

<< Previous in Colored Films

Next in Colored Films >>

Price: $14.00

Width of Material: 60" Wide

Item Number: 5640R

NOTE: Priced per linear foot (LF)

Description of Quantity: Quantity is the length in LF

Quantity:

Email this page to a friend

Ocean Blue Reflective
....
Visual Light Transmittance 15% | Total Solar Energy Rejection 80%
---------------------------------------------------------------------------
Transparent | Reflective | UV Weathered
Deep Dyed Polyester | Pressure Sensitive | Scratch Coated

Architectural | Residential
C o l o r e d W i n d o w F i l m

........................................................................................................

Description:
.
High performance polyester (PET) film deep-dyed colored, laminated with optically clear adhesives. Materials are UV treated for long term sun exposure.

Applications:
.
This film is designed for long-lasting application to (but not limited to) glass. Apply to the interior side of glass: windows, doors, skylights, and curtain walls. Apply to acrylic glass and polycarbonate in areas with little to no sun exposure. Exterior application may require covering with an outside weatherable film. Contact Solar Graphics, Inc. to review your project requirements to determine product suitability. Material is applied wet, using a specific soap solution. Solar Graphics film materials are designed to be applied in multi-layers (up to 6) to obtain a variety of color combinations for specific color matches, reflectance, transparencies, translucencies, or opacities.

Adhesive:
.
A solvent-based polyacrylic permanent adhesive is laminated to the film. The adhesive is optically clear for high visible observations and is treated with UV inhibitors for long-lasting performance in direct sunlight. All films are lined with a silicone liner to protect the adhesive during storage and application.

Scratch Coating:
.
Solar Graphics films are covered with a scratch-resistant coating to ensure long-lasting protection from cleaning and wear and tear. These coatings may show an iridescence or "pearlescent" look on the inside surface due to reactions to some fluorescent or artificial lighting under high-contrast conditions. Changing to a whiter light source like full spectrum bulbs or LEDs helps neutralize these patterns.

Warranties:

Solar Graphics films materials are warranted for a period of 5 years from the date of film purchase for residential and commercial interior application; and warranted for a period of 1 year from the date of film purchase for auto and outside residential and commercial installations. Warranties may be extended to 10 years by Solar Graphics upon review of the project, use of film, and approval of installation contractors. If the film product is deemed defective, Solar Graphic's sole and exclusive obligation is to provide the purchaser's replacement of the window film. Solar Graphics is not responsible for any cost, expenses, losses, or damages that are in any way related to the use of the film, the installation of the product, any defects in the designs, or any failure of the designs to perform as represented or expected by the purchaser and installers. Warranty shall be voided, and Solar Graphics shall not be liable for any losses that are caused by:

The use of non-tested film products or other manufacturers' film products used in conjunction with the Solar Graphics film products.
Improper application or installation of the product.
Abuse of the product or design.
Improper care and treatment of the product.

Terms & Conditions on Sale:

All statements, technical information and recommendations are based on field tests and usage of the product for the past 30 years. Accuracy or completeness is not guaranteed, and the following statement is made in lieu of all warranties, expressed or implied. The seller shall not be liable for any injury, loss, or damage, direct or consequential arising out of the use, application, or inability to use the product. Before using, user shall determine the usability, application, environment, and suitability of the product for its intended use.
.....................................................................................................................